Рецепт пампушек с чесноком:
— 250 мл воды
— 300 г муки ( -)
— 7-10 г сухих дрожжей (смотреть на упаковке)
— 0,5 ч л сахара
— 0,5 ч л соли
— 3 зуб. чеснока
— 0,5 ч л соли
— 1 ч л масла без запаха
— растительное масло для жарки.
Рецепт вафельного торта со сгущенкой:
— вафли
— 200 г вареной сгущенки
— 100 г сливочного масла (можно меньше или больше, по вкусу)
Сотрудничество и идеи: fedulova.letters@gmail.com
#культурныйпапа #константинивлев
Проект реализуется при поддержке Грантов Мэра Москвы для социально ориентированных НКО Комитета общественных связей и молодежной политики города Москвы 12
Проснуться в незнакомом городе однажды утром — самое приятное чувство на свете. Я ещё много где не была, но это в списке моих дел.
Production Music courtesy of Epidemic Sound
Вот это ЗЕМЛЯНКА!!! Устройство новой системы подвеса столы, очистка стен от серости и придание древесине свежего вида, удивительная находка, лоси и куница, обустройство и многое другое в новом эпизоде!
ДОМ под ЗЕМЛЕЙ — проект о современной землянке по классическим правилам
СВОИМИ РУКАМИ — все делаем, строим сами
ЛОСИ — сохатые активно сбрасывают свои рога! Редкие кадры!
Новая стена — улучшаем кухонную стены!
СТОЛ — меняем крепление и делаем его более функциональным!
Строительство Землянки от А до Я! Руководство от ЛЕСНЫХ!
Когда я впервые решил сварить для вас картошку разными способами, я совсем не подозревал, что вам так понравиться этот формат. И вот сегодня я покажу два способа как варить рис. Покажу рис для суши и рис рассыпчатый для обычного гарнира.
#Рис #Суши #КакВарить #Шефповар #ВасилийЕмельяненко #Приготовлювашенастроение
Всем привет!!! Меня зовут Василий и я повар. Везде должна быть уместная еда, в ресторане ресторанная, дома домашняя, на мастер классах интересная. Мне приятно размышлять о еде как таковой, о желаемых вкусах в текущий промежуток времени, лето, зима, осень, все имеет свой характер и вкус. Но учитывайте то, что уже существующее блюдо упрощать не стоит, нельзя пренебрегать вниманием к еде. При этом еда должна быть разнообразной и вкусной. Такими постулатами я руководствуюсь при создании любого блюда, только я их делаю на свой вкус, а вам остаётся их все го лишь изменить на свое усмотрение. С радостью для вас. Василий Емельяненко
Thanks to for Audible for sponsoring todays video. Get your free 30 day trial, one free audiobook, and 2 audible originals here! www.audible.com/blackbeardprojects OR text «blackbeardprojects» to 500500!
More or less two years ago I made a nakiri just like this one: youtu.be/ygCxoUqdrbM
I decided to re-make that exact same blade again to see how my knife making process has evolved over the past two years.
The nakiri I ended up making is 2.3mm thick, 50mm wide, 335mm overall with 195mm blade.
Blade is 1070 (aka C70) high carbon steel, differentially heat treated with edge hardness between 50 and 55 Rockwell. Handle is made of olive and walnut wood, with white (more like gray) felt liners and brass/mosaic pins of 8, 6 and 4mm in diameter.
I just started to list some of the stuff I use for my projects in this amazon storefront: www.amazon.com/shop/blackbeardprojects
Its affiliate marketing, so if you order something from here youll help the channel for free! Thank you!
Index of operation and materials:
0:04 Mark template with spray paint and small magnets
0:25 Rough cut on metal cutting band saw
0:47 Refine profile on 2x72 belt grinder
1:16 Mark position of pin holes
1:46 Cernter punch
1:53 Drill pin holes. 4, 6 and 8mm
2:12 Make this transition nice and round with a rotary tool
2:27 Round off the spine, I like it more this way
2:30 Taxture done with various ball peen and other cross peen hammers
3:31 Preparation for hamon, see video linked above for more info
3:57 Muffler sealer paste
4:50 Hardened in warm vegetable oil
5:40 Tempered for two hours
5:56 File guide I made last week: youtu.be/YNpr7SB-CMw
6:10 Grind single bevel, all done after heat treatment being carefull to not overheat to ensure straightness
7:00 Hand sand to 280 grit before etching
8:48 Etch in ferric chloride to reveal hamon
9:10 Buff the blade with fine steel whool to remove black oxidation from etch
9:40 Wood has been dried in oven over night
9:50 Check moisture content before stabilizing, see video above for more info
10:00 Pulling vacuum! Again, see the dedicated video for more info
10:42 Baking the stabilizing resin
11:07 Cut and grind scales to desired angle
11:40 White felt liners, check the video above for more info
13:00 Hadnle stack glue up with epoxy resin
14:03 Cut scales to size
14:40 Drill pin holes, ca glue used instead of clamps, works well with a piece of tape between scales and tang. Ive seen someone do this here on youtube, cant remember who. If you know let me know and Ill add it here!
15:30 Mosaic pins, detailed video linked above
17:00 Final glue up with slow setting epoxy resin
17:30 Epoxy squeezout cleaned with nitro solvent
17:44 Cut off excess pin
17:55 Grind off excess material with 2x27 grinder and a fresh 40grit belt
18:15 Hand finishing the handle
18:55 Boiled linseed oil as finish
19:16 Microbevel added with MadEdge Pro
19:25 Stropping the edge with leather and fine polishing compound.
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
Бродим по фермерскому рынку в японской глубинке и сравниваем с Токийскими супермаркетами!
Супермаркет в Токио кстати выглядит так: youtu.be/uX1pVlehI0M